Hardwood Floor Refinishing in Los Angeles

At EKO FLOORING, we restore hardwood floors across Los Angeles with precision, professionalism, and clean job sites from start to finish. Whether your floors are scratched, faded, or worn down by time and traffic, refinishing is a smart, cost-effective way to bring them back to shine without the expense of full replacement.

We offer in-home consultations, help you choose the right finish, and manage the entire process so you get great results with minimal disruption.

Why Hardwood Floor Refinishing Matters in Los Angeles

Hardwood floors are a long-term investment — and refinishing them is the best way to protect that investment over time. Homes in Los Angeles often face unique challenges: sun exposure, coastal air, dry climate, and heavy foot traffic. These conditions can dull your finish, open up small cracks, or fade the color of your floors.

Refinishing removes surface damage, evens out the wood, and seals it with a fresh finish that enhances both the look and durability of the floor. It’s a smart upgrade whether you’re staying long-term or preparing to sell.

When to Refinish vs. Replace Hardwood Floors

Not all worn floors need to be replaced. In many cases, refinishing extends the life of your hardwood for decades at a fraction of the cost of replacement.

You may need refinishing if you notice:

Dull, cloudy finish
Surface scratches or scuff marks
Faded color from UV exposure
Small cracks or slight cupping
Uneven sheen across rooms

Replacement may be necessary if:

The floor has deep water damage
Boards are warped or structurally soft
The wear layer is too thin (especially on engineered wood)

During our in-home visit, we’ll assess the condition of your floor and let you know if refinishing is the right approach. If it is, we’ll guide you through the process step by step.

What to Expect During Our Refinishing Process

At EKO FLOORING, we follow a clean and structured refinishing process to minimize disruption and maximize results:

Site Preparation

We protect surrounding surfaces, remove furniture if requested, and tape off rooms to keep dust contained.

Sanding

We sand down the existing finish and surface layer, evening out scratches, discoloration, and minor imperfections. We use commercial-grade sanding equipment with dust containment for a cleaner experience.

Staining (Optional)

If you want to change or refresh the color of your floor, we apply a custom stain based on your chosen tone.

Sealing

We finish the floor with your selected finish type, water-based or oil-based polyurethane, in the desired sheen level (matte, satin, semi-gloss, or gloss).

Drying and Final Walkthrough

Once the finish dries, we inspect the work and walk through it with you.

We keep you informed at every step, and our team never leaves a mess behind.

Types of Finishes and Custom Options

Your floor’s final appearance depends on the type of finish you choose. We help you weigh the look, feel, and maintenance requirements of each:

Water-Based Polyurethane

Dries faster and has lower odor. Available in matte, satin, or semi-gloss. Recommended for faster turnaround and lighter tones.

Oil-Based Polyurethane

Adds warmth and amber tone to wood. Slightly longer drying time but excellent for deeper finishes.

Custom Stains

Match existing tones or create something entirely new. We offer a range of options and test samples on your floor before application.

Whether you want a modern matte finish or a traditional satin sheen, we make sure the end result matches your vision and works with your home’s lighting and design.

Wood Species We Refinish

We refinish all common hardwood flooring types found in Los Angeles homes, including:

Oak (Red & White)

Durable and consistent — takes stain evenly and finishes beautifully.

Maple

Lighter in tone with subtle grain. Requires careful staining to avoid blotching.

Walnut

Naturally dark and rich. Often refinished with clear finishes to enhance the existing color.

Hickory

Extremely hard and visually dynamic. Excellent for high-traffic homes.

Engineered Wood

We can refinish engineered wood floors that have a thick wear layer. We’ll confirm whether your flooring is refinishable during our site visit.

We also address specialty floors and can advise on how many more refinishing cycles your floor can safely undergo.

Damage Repair and Surface Correction Before Refinishing

Before we sand and seal, we inspect for common surface issues and handle basic repairs as part of the process. This includes:

Filling gaps or hairline cracks

Replacing damaged planks (if materials are available)

Spot-patching deep gouges

Leveling uneven areas or high spots

Addressing minor water stains

If deeper damage is discovered, we’ll explain your options and help you determine whether spot repair or partial replacement is needed before refinishing.

How to Maintain Refinished Floors in LA’s Climate

After refinishing, you’ll want to protect your floor from wear and climate-related stress. We provide aftercare instructions specific to your finish, but in general:

Use furniture pads to prevent scratches

Sweep or vacuum regularly to remove grit

Clean with hardwood-safe products only — never wet-mop

Maintain stable humidity between 40–60% to prevent gapping or cupping

Close blinds or use rugs in areas with direct sun to minimize fading

With proper care, your refinished floors can stay beautiful for 10–15 years before needing another touch-up.

Why Choose EKO FLOORING for Refinishing in Los Angeles

We focus solely on flooring — no upselling, no general contracting, and no outsourcing. When you work with EKO FLOORING, you get:

Clear, honest recommendations

Clean, professional job sites

Expert sanding and finishing teams

Accurate timelines and communication

Competitive pricing with no surprises

We serve a wide range of Los Angeles neighborhoods from our showroom, and we've worked with homeowners, contractors, and designers across the city.

Request a Hardwood Refinishing Estimate in Los Angeles

If your floors are scratched, faded, or uneven, refinishing could restore them without the cost of replacement. We’ll help you assess the condition of your floor, walk you through finish options, and complete the job with care and precision.

Visit our showroom or schedule an in-home consultation anywhere in Los Angeles. Call or text (818) 917-7736 to get started.